4-DC/Nexus Files and configuration Rollback.

In this post i will talk about some information about how the NX-OS deal with the different files and the different locations where we can store the different files, as well how to check the differences between the current running configuration and startup configuration, and how to define rollback configuration in case we need to … Continue reading 4-DC/Nexus Files and configuration Rollback.

4-R&S/Multiple Spanning Tree Protocol (MST).

Let's continue the previous three posts 1-R&S/Virtual LAN (VLAN) and Spanning Tree Protocol (STP) , 2-R&S/Spanning Tree Protocol (STP) Part 2. and 3-R&S/Spanning Tree Protocol (STP), RSTP Part 3, so in this post i will talk about the last protocol defined to avoid the loop in the Layer 2 switched network, which is the Multiple Spanning … Continue reading 4-R&S/Multiple Spanning Tree Protocol (MST).

3-R&S/Spanning Tree Protocol (STP), RSTP Part 3.

Let's continue the STP explanation at the previous two posts 1-R&S/Virtual LAN (VLAN) and Spanning Tree Protocol (STP) and 2-R&S/Spanning Tree Protocol (STP) Part 2., in this post i will mention Rapid Spanning Tree (RSTP) and some configurations and verification commands related to RSTP, and i will mention MST in the next post. Rapid Spanning Tree (RSTP) … Continue reading 3-R&S/Spanning Tree Protocol (STP), RSTP Part 3.

3-DC/Nexus Operating System (NX-OS) Command Line Interface (CLI).

In this post i will talk about some information about the NX-OS Command Line Interface (CLI) so that we can know what are the features that are supported by the Nexus  switches and how to configure them using NX-OS CLI (if possible) as the CLI commands i will provide are either based on UNL titanium … Continue reading 3-DC/Nexus Operating System (NX-OS) Command Line Interface (CLI).